WARM WATER HEAT PUMPS
OCHSNER EUROPA N
OCHSNER offers a comprehensive range of warm water heat pumps. Every customer will find the suitable solution that optimally meets their warm water needs with the lowest operating costs. The systems operate with minimal energy consumption and deliver water temperatures of up to 65 °C. They utilize heat from the ambient air for warm water preparation and make use of the energy from the installation room.
OCHSNER WATER heat pumps
Save electricity in hot water generation
OCHSNER water heat pumps utilize waste heat and provide hot water highly efficiently and with low electricity consumption through the thermodynamic process. The OCHSNER technology thus makes a significant contribution to reducing energy costs and protecting the climate.
Easy installation, quick retrofitting
The Warmwasser-Wärmepumpen from OCHSNER are plug-and-play, very quick to install, and almost maintenance-free.
They can be easily combined with any other heating technology.
Efficient use of PV self-consumption
By combining with a photovoltaic system, the hot water heat pump pays off doubly: It increases the economically sensible self-consumption, and the hot water preparation is almost free of charge. Hot water heat pumps for combination with photovoltaics can be recognized by the designation as SmartGrid-capable or SG-ready.
Intuitive. User-friendly, economical: The OCHSNER hot water APP.
Optimize energy consumption without sacrificing comfort: The OCHSNER EASY App allows extensive settings to be made easily and intuitively on a smartphone. Individual time programs can be stored. Spontaneous or temporary adjustments are also possible – for example, when going on vacation or returning home earlier than expected. The current mixed water quantity can be read via the app. Important status information is sent to the user via push notification. Alternatively, settings can be made directly on the device via a rotary knob. Status LEDs indicate the device condition. An interface for the use
of PV self-consumption is integrated.
OCHSNER EUROPA N All models of the series
EUROPA N 200 CA
EUROPA N 300 CA
EUROPA N 300 R CA
Frequently asked questions about OCHSNER EUROPA
The EUROPA N is exclusively designed for the preparation of hot water – it replaces or supplements the hot water function of an existing heating system, but does not provide space heating. The heat source is the room air at the installation location.
Yes, the system operates completely autonomously. The heating system can remain switched off during the warm months – the hot water supply continues independently. Only the drinking water connections need to be adjusted for separation from an existing heating system.
In pure heat pump operation, the EUROPA N reaches up to 65 °C – even at low indoor temperatures. This ensures hygienically impeccable drinking water quality without a heating element. In case of a temporarily very high demand – for example, with guests in the house – a heating element can be activated.
The series is available in three storage sizes: 267, 393, and 415 liters. Due to high output capacities, effectively more hot water is available than the pure storage content would suggest.
The compact systems require little space and can also be installed in utility rooms, storage rooms, or laundry drying rooms. The OCHSNER system partner will clarify which area in the building is best suited during the on-site appointment.
The EUROPA N models are plug-and-play and can be installed very quickly. They can be easily combined with any other heating technology and are virtually maintenance-free.
Yes. All models are SG-ready and have an integrated interface for using PV self-consumption. The hot water preparation can thus be specifically scheduled during times of high solar yield – significantly reducing operating costs.
Helpful Links
